1 1 4 Inch Pond Tubing. Sealproof Kinkproof 1-1/4 Dia Waterfall, Pond Tubing & Aquarium Hose, 1-1/4-Inch ID, 20 FT, Black, Corrugated, Made in USA Visit the Sealproof Store 511 ratings. Non Kink Spiral Tubing 1 1/4 x 10'-This heavy Kink-Free tubing dramatically improves flow. It's flexible, yet won't crimp or collapse around curves o. Create Account and Save 5%. To help get the maximum flow rate from your pump, we have developed a chart to help you select the tubing size you need: Up to 150 GPH: 3/8 inch tubing. Up to 500 GPH: 1/2.
1 1/4 inch pond tubing is a type of flexible pipe commonly used for backyard ponds. It is used for connecting water pumps, filters and other water features. The tubing is made from a thick rubber-like material, and it is highly durable and resistant to kinks, punctures and tears.
When buying 1 1/4 inch pond tubing, it’s important to make sure that you purchase the right size. The tubing should fit snugly on the components it is connecting, and it should also be long enough to reach where it needs to go.
In order to install 1 1/4 inch pond tubing, you will need a few tools. These include a sharp utility knife, a screwdriver, a pair of pliers, and a tube cutting tool. You will also need some silicone sealant to seal the connections.
If you’re connecting 1 1/4 inch pond tubing to a pump, filter or other water feature, you should start by cutting the tubing to the right length. Use the utility knife to make a clean cut, and then use the tube cutting tool to smooth out the edges. Once the tubing is cut to the right size, you can connect it to the component using the screwdriver and pliers. Finally, use the silicone sealant to create a watertight seal.
If you’re connecting two pieces of 1 1/4 inch pond tubing together, you can use either a barbed connector or a compression fitting. To use a barbed connector, simply slide it onto the end of the tubing and then use the pliers to secure it in place. For a compression fitting, slide the tubing into the fitting and then tighten the nut with a wrench. Finally, use the silicone sealant to create a watertight seal.
When installing 1 1/4 inch pond tubing, it’s important to make sure that all of the connections are secure and watertight. Inspect the tubing and connections regularly, and replace any damaged or worn components. Doing this will help ensure that your pond remains free from leaks and other problems.
1 1/4 inch pond tubing is a great way to connect water pumps, filters and other water features in your backyard pond. With the right tools and a bit of know-how, you can easily install it yourself. Just make sure that all of the connections are secure and watertight, and your pond should stay leak-free for years to come.
Changing the Pond Tubing (hose)
It's taken me two months to finally edit this video, but I finally got around to showing the process it took me when I changed my 3/4" pond tubing for a 1.5" PVC pond tubing. It only took me two days because I had to wait for the PVC glue to dry up (24 hours so it won't kill the fish). Everything else was done in a couple of minutes. I also go over a bad pond tubing that would put a pond at risk if installed. Enjoy 🙂
, 1 1 4 Inch Pond Tubing.
