100 Ft Roll 3 8 Copper Tubing. High-Pressure Copper Tubing for Drinking Water This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1, 900 psi..
The 100 ft roll of 3/8 copper tubing is a great option for a variety of projects. It is a great choice for DIY projects because it is affordable, easy to work with, and long-lasting. This tubing is made of copper and has an inner diameter of 3/8” and an outer diameter of ½”. It is lightweight and flexible, making it easy to handle and manipulate.
The 100 ft roll of 3/8 copper tubing is available in several different types, including Type K, Type L, Type M, and Type DWV. Type K is the thickest type of copper tubing, and is the most durable and long-lasting. Type L is thinner than type K and is often used for smaller jobs and projects. Type M is the thinnest type of copper tubing and is used for applications that require less durability. Type DWV is a special type of copper tubing that is used for drainage, venting, and waste systems.
When working with copper tubing, it is important to use the right tools. A tubing cutter is the best tool to use when cutting copper tubing. This tool is designed to cut cleanly and accurately, so that the ends of the tubing are even and straight. When cutting the tubing, make sure to measure accurately and mark the spot where you want to make the cut. Also, always wear safety glasses when using the tubing cutter.
Once the copper tubing has been cut, you will need to prepare the ends for joining. This is done by using a small wire brush or a sandpaper to clean the ends of the tubing and remove any burrs or sharp edges. Once the ends are clean and smooth, you can use a flux and solder to join the pieces together.
When using copper tubing, it is important to be aware of the potential hazards. The tubing should not be exposed to open flames, as this can cause a fire. Also, the ends of the tubing should be capped or covered when not in use, to prevent moisture from entering the tubing.
In conclusion, the 100 ft roll of 3/8 copper tubing is a great option for a variety of projects. It is affordable, easy to work with, and long-lasting. It is important to use the right tools when working with the tubing, and to ensure that the ends of the tubing are cleaned and prepared before joining. Finally, always be aware of the potential hazards of working with copper tubing.
How To Flare Copper Tubing For Gas, DANGER – NOT WATER COMPRESSION NUT
Flare copper tubing for gas using a 2-piece flaring tool that first clamps onto the copper tube, then tightens down to create the conical flare. The flare copper tubing is joined to a special fitting and tightened by a special nut. DANGER – not water compression nut. That type of nut may leak gas. You can use the gas connection for water, DO NOT use water connection for gas. The flare copper tubing for gas is unique. Danger, do not use a water…
Shop for Copper Tubing at Ferguson. Ferguson is the #1 US plumbing supply company and a top distributor of HVAC parts, waterworks supplies, and MRO products. , 100 Ft Roll 3 8 Copper Tubing.
