8 Ft Non Telescoping Curtain Rod

Randall Edwards

8 Ft Non Telescoping Curtain Rod.

8 Ft Non Telescoping Curtain Rod
surce: homedepot.com

An 8 ft non telescoping curtain rod is a type of curtain rod that is used to hang drapery on a window. It is usually made of metal, such as aluminum or steel, and is available in a range of finishes, such as brass, chrome, and nickel. The rod itself is 8 feet long, which is the standard size for curtain rods, and is non-telescoping, meaning that it cannot be adjusted to fit to different window sizes.

When hanging an 8 ft non telescoping curtain rod, you will need to measure the window to ensure that the rod will fit. Measure the width of the window and add at least 6 inches to the measurement to determine the length of the rod you will need. You will also need to decide the placement of the rod, which should be at least 4 inches above the window frame.

To install an 8 ft non telescoping curtain rod, you will need two brackets for mounting the rod, a drill, screws, and a stud finder. Begin by finding the studs in the wall with the stud finder. Then, mark the spot on the wall by the window where you want the brackets to be placed. Use the drill to make holes in the wall, and then insert the screws to secure the brackets.

Next, take the curtain rod and insert it into the brackets. You may need to use a hammer or pliers to help fit the rod into the brackets. Finally, hang the curtain panels on the rod and make sure that they are evenly spaced.

When it comes to cleaning an 8 ft non telescoping curtain rod, the best way is to use a soft cloth and mild soap and water. Avoid using abrasive materials, such as steel wool, as this can scratch the finish. If there are stubborn spots, use a soft brush or a vacuum cleaner with a brush attachment.

If you need to replace an 8 ft non telescoping curtain rod, you can find them at most home improvement stores. They are usually sold in packs of two, with all the necessary mounting hardware and instructions included.

Finally, here is a step-by-step guide on how to install an 8 ft non telescoping curtain rod:

  • Measure the window width and add at least 6 inches to the measurement to determine the length of the rod you will need.
  • Decide the placement of the rod, which should be at least 4 inches above the window frame.
  • Find the studs in the wall with a stud finder.
  • Mark the spot on the wall by the window where you want the brackets to be placed.
  • Use a drill to make holes in the wall, and then insert the screws to secure the brackets.
  • Insert the curtain rod into the brackets.
  • Hang the curtain panels on the rod and make sure that they are evenly spaced.

Telescoping Window Tension Rod

 · , 8 Ft Non Telescoping Curtain Rod.


Having received helpful feedback from forums and friends over the years, I felt it was time to give back to the online community to assist with making decisions when it comes to metal tubes. Furthermore, it is going to eliminate you from losing valuable time and cash - it’s the real reason I created this site - to help others make a promising choice.