Bev A Line Iv Tubing. Excelon® Bev-A-Line IV & V HT are lightweight, high clarity, transparent tubing, which provides higher pressure and vacuum capabilities than other products on the market.. Bev-A-Line IV® tubing can be fabricated into coils, bends, and angles to reduce connector problems and stress cracking of tube walls and fittings. Bev-A-Line IV is not irradiated..
Bev A Line IV Tubing is a type of medical tubing used to deliver fluids, such as blood, medications, and nutrition, directly into a patient’s system. It is made up of a small, thin tube, usually made of plastic, which is connected to a larger tube that supplies the fluids. This tubing is typically used in hospitals and other medical settings, but can also be used at home with the right equipment.
The tubing is connected to an IV bag and inserted into the patient’s vein, typically in the arm. The IV bag is then filled with the desired fluid and hung at a predetermined height above the patient. This height is determined by the doctor, and helps to ensure that the fluid flows at the correct rate.
Once the tubing is connected, a clamp is used to control the flow of the fluid. This clamp is usually adjustable, allowing the user to control the rate of flow and make sure the fluid is delivered at the desired rate. The tubing also has a filter or “Y”-connector that helps prevent air bubbles from entering the patient’s system.
In order to use Bev A Line IV Tubing, the user must have the appropriate equipment. The tubing must be connected to a compatible IV bag and the IV pole must be set to the proper height. The user must also be familiar with the workings of the clamp, as well as the filter, before attempting to use the tubing.
Once the equipment is set up and the tubing is connected, the user must ensure that the tubing is securely attached to the patient’s arm. The user should also ensure that the IV bag is hung at the proper height, and that the clamp is adjusted to the desired rate of flow. The filter should also be checked to ensure that no air bubbles are entering the patient’s system.
The user should also check the tubing for any kinks or blockages that may be present. If any are found, the tubing should be replaced immediately. The user should also check the flow of the fluid periodically to ensure that it is flowing at the desired rate.
Bev A Line IV Tubing is an important piece of medical equipment and should be used with care. Before attempting to use it, the user should become familiar with the equipment and the proper procedures for its use. This will help ensure that the tubing is used safely and effectively.
HOW TO SETUP DIAL-FLOW TUBING
Alternative methods: youtube.com/watch?v=0FwGlWLkMAE&list=PL9MsXGqOudZgA9yQ46TR-s7gzGzk6znlu
Bev-A-Line IV ® tubing can be fabricated into coils, bends, and angles to reduce connector problems and stress cracking of tube walls and fittings. Bev-A-Line IV is not irradiated.. Bev-A-Line IV is a lightweight, high clarity, transparent tubing, which provides higher-pressure and vacuum capabilities than other products on the market. Bev-A-Line IV is. Bev-A-Line IV & V HT® – Clear and Flexible High Purity Process Tubing is lightweight, high clarity, and transparent. It provides higher-pressure and vacuum capabilities than other., Bev A Line Iv Tubing.