How To Punch Holes In Drip Irrigation Tubing.
Punching holes in drip irrigation tubing is an easy job that can be done with the right tools. Here is a step-by-step guide on how to do it:
- Gather the supplies needed for the job. You will need a sharp utility knife, a pair of scissors, a hole punch for plastic, or a drill with a metal cutting bit.
- Cut the tubing to the desired length. It is best to use a sharp utility knife for this step.
- Using the hole punch, make a hole in the tubing. If a hole punch is not available, you can use a drill with a metal cutting bit.
- Make sure the hole is the same size as the fitting you are attaching to the tubing. If the hole is too large, the fitting may not fit properly.
- If you are using a drill, make sure to use a piece of wood underneath the tubing to keep the hole from being too large. Do not push the drill too hard or the hole may be too big.
- Insert the fitting into the tubing and secure it with the appropriate clips or clamps. If using a drill, make sure the hole is not too big or the fitting will not fit properly.
- Repeat the above steps for each hole you need to make in the tubing.
Punching holes in drip irrigation tubing is a simple job that can be done with the right tools. Once you have the supplies and follow the steps, you will be able to punch holes in your irrigation tubing with ease.
How to Use a Key Punch to Punch Holes in Drip Irrigation Tubing
This video shows how to use the very economical key punch to punch holes into drip irrigation tubing. To learn more visit us at: dripdepot.com
Designed to remove the residual debris formed as the hole is created in the drip tubing. Easy-grip handle constructed of durable plastic and non-corrosive materials. The deluxe. , How To Punch Holes In Drip Irrigation Tubing.
