How To Unstick A Telescopic Flag Pole. Hold the base section with one hand, grab the section that won’t un-twist with your other hand and give the pole a firm tap downwards, making sure your hand holding the base is.
When it comes to metal flagpoles, especially telescoping poles, it is not uncommon for them to become stuck. When this happens, the only way to get them to move is to use a process known as “unsticking.” This process is relatively simple, but it does require some special tools and knowledge of metallurgy. In this article, we will go over what you need to do to unstuck a telescopic flag pole.
The first step is to make sure the pole is clean and free of any dirt, debris, or corrosion. If there is any dirt or debris on the pole, use a soft cloth and some soapy water to clean it off. If there is any corrosion, use a wire brush to get rid of it. Once the pole is clean, dry it off with a soft cloth.
Next, inspect the pole to look for any signs of damage or wear. If there is any damage, it will need to be repaired before the pole can be unstuck. If there is any wear, lubricate the pole with a lubricant made specifically for metal. This will help to reduce friction between the telescopic sections of the pole.
Once the pole has been inspected and lubricated, it is time to start the unsticking process. You will need a few tools to do this including a hammer, screwdriver, and pliers. Start by tapping the sections of the pole with the hammer. This will help to loosen any stuck sections. Once the sections are loose, use the screwdriver to try and separate the sections. If this does not work, try using the pliers to twist the sections apart. This should be enough to unstick the pole.
In some cases, the pole may still be stuck after tapping and twisting. In this case, you will need to use another tool, such as a torch, to heat the sections of the pole. This will help to soften the metal and allow the sections to come apart. Be sure to use caution when using a torch and wear protective gear such as gloves, goggles, and a mask.
Finally, once the pole has been unstuck, make sure to inspect it for any signs of damage or wear. If there is any damage, it will need to be repaired before the pole can be used again. If there is any wear, lubricate the pole with a lubricant made specifically for metal. This will help to reduce friction between the telescopic sections of the pole.
Unsticking a telescopic flag pole is not a difficult task, but it does require some special tools and knowledge of metallurgy. Make sure to follow the steps outlined in this article to ensure the pole is unstuck safely and securely. With the right tools and a little bit of patience, you should be able to get your pole unstuck and back in use in no time.
STUCK SWIVEL RING! 🤔🇺🇸
Hi everyone! Using swivel rings allows your flag to fly freely around your flag pole 360 degrees, without getting caught in the wind. This is true int he majority of cases, BUT there are times when the wind blows just right and your flag wraps around the pole, or the directional tug on your swivel ring stops it from moving. Here are some helpful hints if you are in this situation! #telescopingflagpole #swivelrings #oldglory #letherfly #usa…
How do you unstick a telescoping pole? With your pliers fixed gently (but firmly) on the plastic barrel, proceed with the same twisting motion mentioned. MIKE'S Reach-iT PRO-XT siezed… , How To Unstick A Telescopic Flag Pole.