Lansinoh Breast Pump Tubing Connector. CONTENT: MAYMOM TUBING compatible with Lansinoh Breast Pump. Y CONNECTOR and PUMP CONNECTOR included. Work with Lansinoh Signature Pro and Lansinoh. Check Lansinoh Connector & Tubing Set, it is needed to replace it so that you can use your breast pump. Shop now for the best prices and offers and Lansinoh Lebanon!
The Lansinoh breast pump tubing connector is an important piece of equipment for any breastfeeding mother. It connects the pump’s motor to the breast shield and helps to ensure a smooth and comfortable pumping experience. This guide will explain how to properly connect the tubing connector to the motor and shield.
First, you need to make sure that the tubing connector is the correct size for your breast pump. Most breast pumps come with a tubing connector that is pre-sized for the pump. However, if you have purchased an aftermarket tubing connector, you need to make sure it is the correct size for your pump.
Next, you need to insert the tubing connector into the motor. This can be done by gently pushing the tubing connector into the motor until it clicks into place. Make sure that the tubing connector is securely fastened. If it is not, it may come loose during pumping and cause leaking.
Once the tubing connector is securely inserted into the motor, you need to attach it to the breast shield. This can be done by pushing the tubing connector onto the breast shield. Make sure that the tubing connector is firmly attached to the breast shield. Again, if it is not securely fastened, it may come loose during pumping and cause leaking.
Finally, you need to check the connection. To do this, turn on the breast pump and press the start button. If the motor is running, then the connection is secure and you are ready to start pumping. If the motor is not running, then you need to check the connection and make sure that the tubing connector is securely attached.
By following these steps, you should be able to properly connect the Lansinoh breast pump tubing connector to the motor and shield. If you have any questions or concerns, it is always a good idea to contact the manufacturer for assistance.
NENESUPPLY Compatible Tubing Set for Lansinoh breast pumps. Lansinoh pump accessories.
Where to Buy: amzn.to/2SWseyw Amazon Store: amzn.to/2nyw4kB #lansinoh#breastfeeding ✔ CONTENT: NENESUPPLY TUBING SET for Lansinoh Breast Pump. Y CONNECTOR included. Work with Lansinoh Signature Pro and Lansinoh Smartpump. Made by Nenesupply. Not Original Lansinoh Pump Parts. ✔ Y CONNECTOR INCLUDED. DOES NOT INCLUDE PUMP CONNECTOR. Include 2 40 cm tubes and 1 65 cm tubes. 6 inches Longer than OEM tubes. Use your own Pump Connector with this…
Not Original Lansinoh Pump Parts TUBING ONLY. CONNECTORS ARE NOT INCLUDED. Include 3 tubes; same length as the OEM one to maintain the same suction power as the. Connector & Tubing Set – Double Electric Breast Pump. £14.99. ( 3 ) When using your 2-in-1 Double Electric Breast Pump, or SmartPump 2.0, you may need to replace your. Breast Pump Parts and Accessories; Silicone Tube (800mm) Pump Connector; AC Adapter * Micro USB Power Bank – not included; If you need help with., Lansinoh Breast Pump Tubing Connector.
