Telescope Tube End Covers

Randall Edwards

Telescope Tube End Covers. SVBONY Dust Caps Set for 1.25inch Astronomy Telescope Eyepiece Barlow Lens or Other Accessories(6 Dust Caps and 6 Dust Plugs) 4.6 4.6 out of 5 stars (16) $10.99 $ 10 . 99 365 Series Cover for 5" and 6" f/6 to f/8 refractors on a large German equatorial mount. $169.00. Add To Cart.

Telescope Tube End Covers

Telescope tube end covers are important components of a telescope. They are used to cover the open ends of the telescope to protect the optics from dust and other debris. These covers are made of durable materials such as plastic, metal, or rubber. They come in various sizes and shapes to fit different types of telescopes.

Telescope tube end covers are typically secured by a hook-and-loop closure system. This type of system is easy to use and does not require any tools to install. Simply hook the cover onto the telescope tube and secure it with the hook-and-loop system. Make sure the cover is secure before using the telescope.

To clean telescope tube end covers, remove the cover from the telescope and use a soft cloth dampened with a mild detergent to remove any dirt or debris. Rinse the cloth with clean water and wipe the cover clean. Allow the cover to air dry before re-installing it on the telescope.

If the telescope tube end cover is cracked or damaged, it should be replaced. It is important to use the correct size and type of cover for the telescope. Using the wrong size or type of cover can cause damage to the telescope and its optics.

To install a new telescope tube end cover, do the following:

  • Measure the diameter of the telescope tube
  • Purchase a cover that is the same size as the telescope tube
  • Secure the cover onto the telescope tube with the hook-and-loop closure system
  • Check that the cover is securely attached to the telescope tube

It is important to inspect telescope tube end covers periodically to ensure that they are in good condition. If the covers are cracked or damaged, they should be replaced immediately. This will help to protect the telescope and its optics from damage.

Following these steps will help to keep the telescope tube end covers in good condition and will help to ensure that the telescope is always in good working order.

Telegizmos 365 Telescope Cover – Review after two years!

I use the Telegizmos 365 telescope cover to keep my equipment (OTA, telescope mount, astro camera, filter wheel, electronic focuser, guide-scope, guider, etc.) always fully setup on my roof balcony – and this in the very humid Tokyo weather! 2 years down the road, what are my feelings about this cover? Watch to find out! Here is the Telegizmos website And if you feel like supporting me, an affiliate…

We are now accepting pre-orders. Early bird pricing available for orders placed by June 30. Preliminary info provided by ZWO: Sensor:IMX462. Product Size:142*129*257mm.. 18"-20" F/4.5 truss tube Dobsonian standard full scope cover. $149.00., Telescope Tube End Covers.

Having received helpful feedback from forums and friends over the years, I felt it was time to give back to the online community to assist with making decisions when it comes to metal tubes. Furthermore, it is going to eliminate you from losing valuable time and cash - it’s the real reason I created this site - to help others make a promising choice.