Swagelok Fittings For Plastic Tubing. Step 1: Insert the tubing into the tube fitting. Make sure the tubing rests firmly on the shoulder of the fitting body and that the nut is finger tight. Step 2: Mark the nut of the. properly installed Swagelok tube fittings, will give you a leak-tight system and provide reliable service in a wide variety of applications. For maximum assurance of reliable.
Swagelok fittings for plastic tubing are an essential component of any plumbing system. Not only are they reliable and easy to install, but they also provide a secure connection between components. Swagelok fittings are available in a variety of sizes and configurations to accommodate any plastic tubing application. Here is a quick guide to using Swagelok fittings for plastic tubing.
The first step is to measure the tubing for the connection. It is important to measure the outside diameter of the tubing to ensure the correct fitting size is chosen. Once the tubing has been measured, the appropriate fitting can be selected from the Swagelok catalog.
Next, the fitting needs to be installed. The fitting should be inserted into the tubing until it is firmly seated. If the fitting is not seated properly, it could cause leaks or other problems. It is important to use the proper tools and techniques to ensure a secure connection.
Once the fitting is securely in place, the tubing needs to be cut to the desired length. A tubing cutter should be used to ensure a clean, straight cut. Make sure to leave enough room for the fitting to be inserted onto the tubing.
The next step is to prepare the tubing for installation. Be sure to use a deburring tool to remove any rough edges from the inside and outside of the tubing. This helps to ensure the tubing is free of any debris that could cause problems with the connection.
Finally, the fitting can be securely attached to the tubing. Use a wrench to tighten the fitting to the tubing until it is snug. This will ensure a tight, leak-free connection. Swagelok fittings are reliable and easy to install, making them an ideal choice for any plastic tubing application.
How to Assemble Tube Fittings (1″ and Under) | Tech Tips | Swagelok [2020]
Tube fittings are designed to provide a leak-tight seal for pressures up to the suggested allowable pressure rating of the tubing. For this reason, it is imperative that tube fittings are installed correctly. Discover the three-step process for manually assembling tube fittings that are 1″ and smaller. To complete this task, you will need two open-end wrenches (or one open-end wrench and a vise), a Swagelok®️ gap inspection gauge, a…
Fittings — Tube Fittings and Adapters — Spare Parts and Accessories — Tubing Inserts Achieve leak-tight performance with a robust tube grip and vibration resistance. Yor-Lok Fittings for Stainless Steel Tubing Use these fittings at pressures up to 9, 700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high., Swagelok Fittings For Plastic Tubing.