Sizes Of Drip Irrigation Tubing. The most common size of main line drip tubing is also called 1/2" mainline drip tubing. Now, there are many sizes of 1/2" drip tubing and almost none of them actually measure 1/2". The most common size in drip irrigation is .700, measuring .700 O.D. (Outer Diameter) x .600" I.D. (Inner Diameter). Tubing. Your #1 source for drip irrigation tubing at affordable prices! We offer drip tubing in 1/8", 1/4", 1/2" and 3/4" sizes. Larger sizes of polyethylene Oval Hose™ are also available. Important Notes: Tubing is measured by the inside. For many drip irrigation applications, 1/4 micro tubing is a must. Tubing such as 1/4 Polyethylene Micro Tubing may be used for connecting drip emitters, sprayers, misters and mini-sprinklers to mainline tubing. 1/8 Micro Tubing Getting down to the mini micro end of things, 1/8 Polyethylene Micro Tubing is about as low as you can go.
Drip irrigation tubing is a necessary component of any drip irrigation system. It is important to select the right size tubing for the job to ensure a successful irrigation system. There are three primary sizes of drip irrigation tubing: 1/4 inch, 1/2 inch, and 3/4 inch.
Also Read
1/4 Inch Tubing
The smallest drip irrigation tubing is 1/4 inch. This tubing is typically used for connecting emitters, micro-sprays, and misters. 1/4 inch tubing is also used for connecting the mainline to the valves and filter.1/2 Inch Tubing
1/2 inch tubing is the most commonly used size for drip irrigation systems. It is the size used for the main line and the sub-main line. 1/2 inch tubing is also used to connect the valves and filter to the main line.3/4 Inch Tubing
3/4 inch tubing is the largest size of drip irrigation tubing. This tubing is used for very large applications and for long runs of the main line. It is also used for connecting the mainline to the pump and for connecting the mainline to the pressure regulator.Selecting the right size tubing for your drip irrigation system is essential for a successful system. The three primary sizes of tubing are 1/4 inch, 1/2 inch, and 3/4 inch. Each size is used for different applications and for different lengths of runs. Understanding the purpose of each size of tubing will help you select the right size tubing for your project.
Choosing Your Irrigation Tubing
University of Arizona Cooperative Extension in Pinal County Agent Rick Gibson describes how to recognize different types of irrigation tubing.
Perma-Loc tubing fittings are available for use with drip irrigation poly tubing in the following sizes: ½”, ¾” and 1". We also have Drip Tape Perma-Loc fittings that work with ⅝” and ⅞” drip tape. All of our Perma-Loc fittings. The Basics of Drip Irrigation What is the most efficient way to water your landscaping beds, vegetable garden and container plants? For non-grass areas like these, drip irrigation is an ideal watering solution that will provide great results while saving you water. The videos below will take you through the basics of drip irrigation — including how a drip irrigation. Tubing. 1/2" Tube.700 OD (most common) 1/4" Microtube; 1/8" Microtube; Pre-Cut Microtube. 1/4" Pre-Cut Microtube; 1/8" Pre-Cut Microtube; 1/4" Poly Risers; 1/2" Drip Line. 17mm Check Valve Drip Line; 17mm Brown; 1/4" Drip Line; Drip Tape; 3/4" Tube; 1" Tube; Fittings. 1/8" 1/4" 1/2".700 O.D..620 O.D..710 O.D. 16mm Barbed Fittings; 17mm., Sizes Of Drip Irrigation Tubing.
