3 8 Drip Irrigation Tubing. Drip tubing is normally sold in lengths of 100, 500, or 1,000 feet. It is black in color and has a high resistance to sunlight. In normal sunlight situations, drip tubing will last for about 30.
3/8 drip irrigation tubing is a great way to efficiently and effectively water plants in your garden. With this type of tubing, water is released slowly and directly to the base of the plants, where it is most needed. This type of tubing also helps to conserve water, as it is released in small, measured amounts. Here’s how to install 3/8 drip irrigation tubing.
Also Read
Before you begin, you’ll need the following equipment:
- 3/8 drip irrigation tubing
- Fittings (elbows, tee connectors, etc.)
- Garden hose
- Garden hose faucet
- Tape measure
- Screwdriver
Once you have all the necessary equipment, you’re ready to begin.
Step 1: Measure the area you wish to irrigate. Measure the length and width of the area, and then use this measurement to calculate the amount of tubing you will need.
Step 2: Install the garden hose faucet. Unscrew the end of the garden hose and attach the faucet. Use the screwdriver to tighten it in place.
Step 3: Attach the 3/8 drip irrigation tubing to the faucet. Connect the tubing to the faucet using the appropriate fitting.
Step 4: Install the other fittings. Use the appropriate fittings to connect the 3/8 drip irrigation tubing to the garden hose.
Step 5: Connect the tubing to the plants. Attach the 3/8 drip irrigation tubing to the base of each plant, using the appropriate fittings.
Step 6: Turn on the water. Turn on the water at the garden hose faucet and allow the water to run through the tubing. This will ensure that the plants are getting the water they need.
That’s it! With these simple steps, you’ve successfully installed 3/8 drip irrigation tubing. If you have any questions, there are plenty of online resources available to help you.
How to Connect 1/4 Irrigation Tubing to 1/2 Irrigation Tubing
This video explains and demonstrates how to connect ¼” Poly Tubing to ½” or larger Poly Tubing for a drip irrigation system. All the parts used are linked below for convenience. Visit us at: dripdepot.com/ Products used: ¼” Pro Punch – dripdepot.com/product/pro-punch-quarter-inch-hole ¼” Poly Tubing – dripdepot.com/category/polyethylene-irrigation-tubing ¼” Coupling – …
Raindrip 1/4-in Barbed Drip Irrigation Coupling (Pack Of-50). Build, repair, or expand your drip irrigation project with the 1/4 in. Barbed Coupling. The micro fitting connects 2. Tubes and drip lines are the arteries of an irrigation system, carrying life-giving fluids to the plants that depend on them. At DripWorks, we carry a big selection of irrigation tubing,. Drip Irrigation tubing for residential, landscape and commercial applications. Featured Products; Timers. Bluetooth Timers; Outlet Powered (AC) Battery Powered (DC) … 3/4"., 3 8 Drip Irrigation Tubing.
