2 Inch Split Loom Tubing. Kable Kontrol™ 2-1/2" Inch Split Wire Loom tubing Features Resistant To Auto Fluids & Chemicals Temperature Range -40F To 200F (-40C – 93C) Made of Durable Black.
2 inch split loom tubing is a type of wire covering that is commonly used for organizing and protecting electrical wiring. It is made of a flexible, corrugated plastic that is split down the center, allowing for easy insertion and removal of wires. This type of loom tubing is widely used in industrial, automotive, and home wiring applications.
Also Read
To install 2 inch split loom tubing, start by measuring the length of tubing needed for the wiring job. Cut the tubing to the desired length, being sure to leave enough extra for the ends of the tubes to overlap. Once the tubing is measured and cut, slide the wiring into the split loom tubing, making sure the wires are evenly spaced. Once all the wires are in, use a heat gun or torch to weld the two ends of the tubing together.
When working with 2 inch split loom tubing, it is important to use the correct tools. To safely and securely insert the wiring into the tubing, use a wire loom tool, or a flat-head screwdriver. To weld the two ends of the tubing together, use a heat gun or torch. When using a heat gun or torch, be sure to wear safety glasses and take safety precautions to avoid any accidents.
2 inch split loom tubing is an effective and economical way to protect and organize wiring in a variety of applications. It is easy to install and provides an extra layer of protection to the wires, helping to prevent any short circuits, corrosion, or other damage.
Here is a step-by-step guide for installing 2 inch split loom tubing:
- Measure the length of tubing needed for the wiring job.
- Cut the tubing to the desired length.
- Slide the wiring into the split loom tubing, making sure the wires are evenly spaced.
- Use a heat gun or torch to weld the two ends of the tubing together.
- Use a wire loom tool or flat-head screwdriver to safely insert the wiring into the tubing.
- Wear safety glasses when using a heat gun or torch.
2 inch split loom tubing is an easy and effective way to organize and protect wiring in automotive, industrial, and home wiring applications. It is easy to install and provides an extra layer of protection to the wires, helping to prevent any short circuits, corrosion, or other damage.
Loom in seconds Installation Wire loom tool
Wire loom and split tubing is great for protecting wires in the engine bay or other areas outside the vehicle. The problem is it can be time consuming to install wires into it, and the jagged edge can hurt your fingers. How can we quickly install wires into wire loom? A wire loom tool is the solution! ➜ Loom tool 5 piece kit: amzn.to/2yYBCFC ➜ Smallest tool: amzn.to/2y1cDDj As an Amazon Associate I earn from qualifying purchases. 🔊 Want…
54 products. Split corrugated loom tubing covers and organizes wire and cable and has flexible walls with a lengthwise slit. Bundles of wire or preassembled harness assemblies. Kable Kontrol™ 2" Inch Split Wire Loom tubing Features Resistant To Auto Fluids & Chemicals Temperature Range -40ºF to 200F (-40ºC – 93ºC) Made of Durable. Black polyethylene split loom tubing provides wire and wire harnesses with protection from heat & sunlight, water, snow, salt, vibration wear, fraying or puncture. The quickest and., 2 Inch Split Loom Tubing.
