How To Use A Bushnell Reflector Telescope. Views: 3679. The reflector is one of the classic designs for a telescope. The reflector telescope was first conceived by Sir Isaac Newton (hence “newt” in Newtonian),. 1. Arrange the telescope so that the telescope body is horizontal to the floor (latitude of 0°). Loosen the Right Ascension Lock (21). The telescope should now turn freely about the.
A Bushnell reflector telescope is a great tool for amateur astronomers and astrophotographers alike. With its powerful optics, it can provide stunning views of the night sky and capture beautiful images of distant planets and galaxies. This article will provide a step-by-step guide on how to use a Bushnell reflector telescope.
The first step is to assemble the telescope. The Bushnell reflector telescope comes with instructions that should be followed closely to ensure proper assembly. To help with the assembly, a toolbox and a set of Allen wrenches should be provided with the telescope. Once the telescope is assembled, a tripod should be used to securely mount the telescope.
The next step is to align the telescope with the sky. This is done by first pointing the telescope at the North Star, Polaris. Once the telescope is aligned with Polaris, the telescope should be moved slowly to other celestial objects in the sky. It is important to remember to use the telescope’s slow motion control knobs for accurate alignment with the desired object.
The third step is to focus the telescope. This is done by adjusting the focuser knob until the desired object is in focus. It is important to be patient while focusing the telescope, as it may take several attempts to get the perfect focus. Once the object is in focus, the telescope can be used to observe or photograph the object.
The fourth step is to attach any desired eyepieces or filters to the telescope. The Bushnell reflector telescope comes with several different types of eyepieces and filters that can be used to enhance the view of the night sky. Be sure to carefully read the instructions that come with the eyepieces and filters before attaching them to the telescope.
The fifth step is to observe or photograph the desired object. Once the telescope is in focus and any desired eyepieces or filters are attached, the object can be observed or photographed. For astrophotography, a camera should be mounted to the telescope. The camera should then be adjusted for the desired exposure time and the telescope should be pointed at the desired object. Once the exposure is complete, the camera should be removed from the telescope and the images can be downloaded to a computer for further processing.
The sixth and final step is to store the telescope. When not in use, the telescope should be disassembled and stored in a safe and dry location. This will help protect the telescope from dust and moisture and will help ensure a longer life for the telescope.
In conclusion, a Bushnell reflector telescope is a great tool for amateur astronomers and astrophotographers alike. By following the steps outlined in this article, the user can easily and safely use the telescope to observe and photograph the night sky. With its powerful optics, the Bushnell reflector telescope can provide stunning views of the night sky and capture beautiful images of distant planets and galaxies.
Bushnell 4.5 inch reflector telescope setup.MOV
telescope OBJECTIVE lens focal length divided by EYEPIECE focal length = MAGNIFICATION (e.g. Using the 20 mm lens, a sample calculation would look like this:. For practice set up your telescope and, using the lowest power eyepiece, point the main scope at something about 100 feet (30.5 m) away like a tree (not the sun!).. To use a Bushnell reflector telescope, assemble it with its parts, such as an adjustable aluminum tripod, refractor telescope assembly, equatorial mount, red dot wide., How To Use A Bushnell Reflector Telescope.
