Ridgid No 10 Tubing Cutter. Wrenches & Tubing Tools. Tube Cutting & Preparation . Tubing Cutters; Power Tubing Cutters; Plastic Pipe Cutters; Copper Cleaning Brushes; Copper Cutting Prep.
The Ridgid No 10 Tubing Cutter is an essential tool for anyone who works with metal tubing. It is a heavy-duty tool that allows you to cut through metal tubing quickly and accurately. With this tool, you can cut pipes with a diameter of up to 1-1/8 inches. This makes it perfect for a variety of applications, including industrial, automotive, and home improvement projects.
Also Read
The Ridgid No 10 Tubing Cutter is designed to be easy to use. It features a hardened steel cutting wheel that is designed to stay sharp, even after repeated use. The spring-loaded handle makes it easy to adjust the cutting pressure and the built-in deburring tool helps you create a smooth cut edge. The handle also features a locking mechanism that helps prevent accidental opening.
To use the Ridgid No 10 Tubing Cutter, start by placing the tubing in the cutting area of the tool. Make sure the tubing is square and centered in the cutting area. Once the tubing is in place, squeeze the handle to engage the cutting wheel. Keep the handle squeezed and slowly rotate the tubing until it is completely cut. The built-in deburring tool can then be used to clean up the cut edge.
It is important to make sure the tubing is properly aligned in the cutting area before beginning to cut. If the tubing is not properly aligned, the cut may not be straight. It is also important to make sure the cutting wheel is properly lubricated with a cutting oil before cutting. This will help to reduce friction and extend the life of the cutting wheel.
When using the Ridgid No 10 Tubing Cutter, it is important to use safety precautions. Wear safety glasses and gloves to protect yourself from metal chips and other debris. Additionally, it is important to make sure the cutting wheel is properly lubricated and replaced when necessary.
The Ridgid No 10 Tubing Cutter is an essential tool for anyone who works with metal tubing. It is easy to use and can cut pipes with a diameter of up to 1-1/8 inches. To ensure a clean and accurate cut, be sure to properly align the tubing in the cutting area and lubricate the cutting wheel with a cutting oil. Additionally, use safety precautions such as wearing safety glasses and gloves when using the Ridgid No 10 Tubing Cutter.
Pittsburgh Tubing Cutter 40913 VS Ridgid No.10 Comparison
I test out the Harbor Freight Pittsburgh Tubing Cuter Model 40913 and compare it to the Ridgid No.10 tubing cutter. Both tubing cutters have very similar appearances. I cut M copper and also test out the reamers.
Features Features an enclosed feed screw to eliminate clogging and jamming. X-CEL® Knob cuts tubing more quickly and easily with a larger, more ergonomic design. X-CEL., Ridgid No 10 Tubing Cutter.
