How To Straighten Vinyl Tubing. here's a tip for straightening that curved vinyl hose! If you get a cork and stick it in one end of the vinyl hose, then pour in boiling water (carefully, of course!) the hose.
Vinyl tubing is a popular material used in plumbing and other industrial applications. It is flexible and easy to use, but sometimes it can become bent or twisted and need to be straightened. Straightening vinyl tubing is a relatively simple process if you have the right tools and materials.
Also Read
First, you need to have a few items on hand. You will need a flat surface, a heat gun or propane torch, and a flat object like a ruler or piece of wood. Make sure your work area is well ventilated and that you have protective eyewear and gloves.
To begin, you will want to lay your vinyl tubing on the flat surface. Then, you will need to apply heat to the tubing. You can use a heat gun or a propane torch, depending on the size and shape of the tubing. Heat the tubing until it is warm to the touch, but not hot enough to burn you.
Next, you will need to use the flat object to straighten the tubing. Place the flat object on the tubing, and then use your hands to gently push and pull the tubing back into its original shape. Take your time and make sure the tubing is straight before moving on to the next section.
Once you have straightened the tubing, you will need to let it cool. Once it has cooled to room temperature, you can inspect it to make sure it is straight. If it is not, you can reheat it and repeat the process until it is straight.
Finally, you can use the tubing as you normally would. It is important to note that the process of straightening the tubing can weaken it, so be sure to inspect it regularly for any signs of wear or damage.
Straightening vinyl tubing is a relatively simple process if you have the right tools and materials. Just make sure to use caution when applying heat and use a flat object to help guide the tubing into its original shape. With a little bit of patience, you can have your vinyl tubing looking like new in no time!
How to Straighten Vinyl Tubing – Fast! Making Rigid and Coiled Tubing Flexible Again
When you store your vinyl tubing, it becomes rigid. Don't toss it, though. Bob shows you how to make coiled tubing flexible again for use with your aquariums, or any project that requires vinyl tubing. Music supplied by McRae Enterprises just az aquatics and justaz.com productions are responsible for the content of this video 2021 and beyond
I bought some 1" ID and 1.25" ID braided PVC (vinyl) tubing and as always, it was rolled and the tube was somewhat flattened out. I usually use boiling water to heat it. ( (FORDTECH)) said: If it was me I would probably try to boil or very hot water in a large pot for 30-60 seconds then pull out and let cool holding in straight. April 28, 2013. Heat gun could melt it, you need to be very careful using one with a softer plastic like vynl tubing. Like mentioned boiling water is best as that will not., How To Straighten Vinyl Tubing.
