Dock Auger For Pvc Tubing. Excellent Auger For Shallow Soft Bottom Anchor Reviewed in the United States on October 19, 2019 Package Quantity: 1 Verified Purchase Attached to a PVC. The auger is specifically designed to fit standard 1.5" schedule 40 PVC Pipe with an inner diameter of 1.57". Once attached to a pipe the auger can be twisted into sandy lake. TORQ'D Auger Dock Auger for PVC Tubing 10 Pack in Docking & Anchoring Equipment. TORQ'D Auger Dock Auger for PVC Tubing 10 Pack, Docking & Anchoring.
A dock auger is a tool used for making holes in PVC tubing. It is designed to cut through the thick plastic walls of the tubing with ease. The auger is made up of a long metal shaft with a cutting head at the end. The cutting head has a sharp edge that is designed to cut through the plastic. The auger is rotated by hand or with a drill, and the cutting head creates a clean, precise hole in the tube.
Also Read
Using a dock auger for PVC tubing is a relatively simple process. First, the auger needs to be securely attached to the tube. This can be done by drilling a hole in the tube and then inserting the auger into the hole. The auger should then be secured by tightening the bolts on the auger.
Once the auger is in place, the cutting head can be inserted into the tube. The cutting head should be positioned so that it is perpendicular to the tube. The cutting head should then be rotated in a clockwise direction to begin cutting the hole. The hole should be cut slowly and evenly to ensure a clean cut and prevent the auger from jamming.
Once the hole is cut, the auger should be removed from the tube. The auger should then be cleaned and inspected for any damage that may have occurred during the cutting process. It is important to ensure that the cutting head is sharp and in good working condition before using it again.
Using a dock auger for PVC tubing is a great way to quickly and easily create precise holes in the tubing. It is important to make sure the auger is securely attached to the tube and that the cutting head is positioned correctly before cutting the hole. Following these steps will ensure a clean and precise cut every time.
Using a dock auger for PVC tubing is a simple and effective way to create precise holes in the tubing. By following these steps, the user can ensure a clean, precise cut every time.
augered dock install
This shows you how to install a dock with augers. Keep in mind you only need augers if you are going to be tying a boat directly to the dock. On that note, usually augers are still not needed on every pole. Augering can be tough work, We try to avoid it if we can.
6 Pack• Fits 1.5" Sch 40 PVC with an ID of 1.57"• Ideally suited for sand, clay, mud or small stone lake bottoms.• Made in the USA from MILITARY GRADE composite• Will not break. Auger is perfect for a freestanding dock system to help anchor and stabilize, Ideally suited for sand, clay, mud or small stone lake bottoms. Will not break like some. , Dock Auger For Pvc Tubing.
