Watson Marlow Peristaltic Pump Tubing. Uses Watson-Marlow continuous tubing for peristaltic pumps (sold separately) 120S/D1 (14-284-202) Single channel, manual control Flowrate range: -.01 to 120mL/min. at 2 bars. 530 series peristaltic pumps deliver unrivaled accuracy with simple-to-use HMI requiring minimal key presses during operation. Fluid is fully contained within the tube, providing. Watson-Marlow are the only peristaltic pump manufacturer to make their own tubing. The characteristics of the pump, including suction lift, pressure, life, flow rate and efficiency.
Watson Marlow Peristaltic Pump Tubing is a type of tubing designed for use with peristaltic pumps. The tubing is designed to be flexible and to be able to withstand the pressure and flow rates of the pump. This type of tubing is commonly used in applications such as chemical transfer, water treatment, and food and beverage processing.
Also Read
The tubing is made of a durable material such as PVC, polyurethane, or silicone. The material is chosen based on the application and the conditions the tubing will be operating in. PVC is the most common material and is often used in applications where temperatures are not too high and where there is not a risk of chemical attack. Polyurethane is used in higher temperature applications and is also more resistant to chemical attack. Silicone is the most expensive option, but it is extremely flexible and can withstand a wide range of temperatures and pressures.
The tubing is also available in a variety of sizes and shapes. The most common shapes are round, oval, and rectangular. Rectangular tubing is often used in applications where the tubing needs to fit around corners or in tight spaces. The size of the tubing is determined by the application, the flow rate, and the pressure requirements.
Another important factor when choosing Watson Marlow Peristaltic Pump Tubing is the type of connectors used. The connectors are typically either Luer-lock or push-fit. Luer-lock connectors are more secure and are often used when there is a risk of leakage. Push-fit connectors are easier to use and are often used in applications where there is no risk of leakage.
Installation Process
Installing Watson Marlow Peristaltic Pump Tubing is a straightforward process. First, the end of the tubing must be cut to the desired length. It is important to make sure that the cut is straight and even. Next, the connector must be inserted into the end of the tubing and then secured with a clamp or other device. Finally, the tubing should be connected to the pump and tested for proper operation.
When installing Watson Marlow Peristaltic Pump Tubing, it is important to make sure that the tubing is secured properly and that the connections are drip-proof. If the tubing is not properly secured, it could cause leakage or failure of the pump. It is also important to inspect the tubing regularly to make sure it is in good condition and not cracked or damaged.
In summary, Watson Marlow Peristaltic Pump Tubing is a type of tubing designed specifically for use with peristaltic pumps. The tubing is available in a variety of sizes and shapes and is made of materials such as PVC, polyurethane, and silicone. The connectors used to connect the tubing to the pump are typically either Luer-lock or push-fit. Installing the tubing is a simple process, but it is important to make sure that the tubing is properly secured and that the connections are drip-proof.
Watson Marlow 704 / 720 / 730 Pump Tubing Selection, Loading & Use
How to select and load tubing in the Watson Marlow 704, 720 and 730 pumps. The companies we represent: WATSON MARLOW FLEXICON PUMPS & FILLING watson-marlow.com/ MDI MEMBRANE TECHNOLOGIES mdimembrane.com/
For maximum tube life Use a large-bore tube at low speed For maximum flow rate Use the largest tube at maximum speed For maximum accuracy Use a small bore tube at high. Peristaltic pumps work by using rollers or shoes to compress the tube or hose. Learn more about the benefits of switching to our peristaltic pumps in your process. Skip Navigation.. Watson-Marlow peristaltic pumps Qdos chemical metering pumps Flow rates to 2,000 ml/min (31.7 USGPH) and pressures up to 7 bar (100 psi). Pumps – cased pumps., Watson Marlow Peristaltic Pump Tubing.
