When To Use Low Sorbing Tubing. My facility does not carry low absorption tubing. I know some medications, in particular insulin, diprivan & NTG can be absorbed through the tubing and therefore. o Using low-sorbing tubing o Through dedicated IV lumen • Two independent checks are not required : Page : 3 : of : 4 : Revised: 7/17 : NIH Clinical Center High Alert Medications.
Low sorbing tubing is a type of tubing made from materials that are resistant to absorbing atmospheric gases. This type of tubing is often used in metallurgical processes, such as welding and tempering, to help reduce the likelihood of air contamination. In order to determine if low sorbing tubing is the best option, it is important to understand the types of gases that can be present in the atmosphere and the potential effects they can have on the process.
In order to determine if low sorbing tubing is necessary, it is important to check the atmosphere for the presence of any gases that could potentially contaminate the process. Some common atmospheric gases that can have an effect on the process are oxygen, nitrogen, and hydrogen. If any of these gases are present in the atmosphere, it is important to use low sorbing tubing to help reduce the risk of contamination.
In addition to checking for the presence of atmospheric gases, it is also important to consider the type of process that will be taking place. For example, if the process involves welding, it is important to consider the type of metals in use, as some metals can be more susceptible to atmospheric contamination than others. If any of the metals in use are particularly prone to contamination, then low sorbing tubing should be used to reduce the risk.
Once the atmospheric gases and metals have been taken into account, it is important to determine the size of the tubing that is necessary. Low sorbing tubing typically comes in a variety of sizes, so it is important to select the size that best fits the process. It is also important to consider the length of the tubing, as this can affect the amount of air that gets trapped inside the tubing and potentially contaminate the process.
When selecting low sorbing tubing, it is important to choose a material that is durable and able to withstand the temperatures and pressures of the process. Some common materials used for low sorbing tubing include stainless steel and PVC. Additionally, it is important to ensure that the tubing is free from any defects or damage, as this can affect its ability to resist absorption of atmospheric gases.
Finally, it is important to inspect the tubing before use to ensure that it is in good condition. This includes checking for any signs of damage or defects, as well as ensuring that it is properly sealed. If any issues are found, it is important to replace the tubing in order to ensure that the process is not contaminated.
In summary, low sorbing tubing is a type of tubing made from materials that are resistant to absorbing atmospheric gases. It is important to check the atmosphere for the presence of any gases that could potentially contaminate the process, and consider the type of process and the metals in use. Additionally, it is important to select the appropriate size and material of the tubing, and inspect it for any defects or damage before use. By following these steps, it is possible to ensure that the process is not contaminated by atmospheric gases.
IV Extension Tubing
Read more on stepwards.com: stepwards.com/?page_id=24816
If you do not use one of these sets, close monitoring for clinical response and greater titiration may be required as the drug will adhere to the PVC in the set. Lynn Lynn. lined or non PE lined tubing as applicable per institutional standards with attached Close System Transfer Device (CSTD). a. INV agents administered via syringe pump., When To Use Low Sorbing Tubing.
